Ryf Ryeco RMM2010-CNC, Руководство по эксплуатации

Страница: 4 / 24

Operating Instructions Ryeco RMM2010 - CNC
2.2 Use contrary to intended use
A RMM2010 must not be used as follows:
• Depending on the model, the measurement table that can be moved in the X- and
Y-direction must not be operated or moved in any other way than in manual mode
(RMM 2010 manual) or with the help of the integrated CNC control (RMM2010-CNC).
• The load placed on the measurement table must not exceed the specified total maximum
weight (do not use for material storage or as a support!).
• The measurement table must not come into contact with other objects (e.g. walls,
cabinets) even when the maximum traverse path in the X- or Y-direction is used. A
distance of one (1) meter must be maintained on all sides.
• The positioning laser (if available) must not be removed from its fastening, rotated in
another direction or modified or manipulated in any other way.
• The positioning laser must not be used for any other purpose than to position
measurement objects.
3 General safeties
3.1 Operator's area of responsibility
The operator of the measurement machine is responsible for implementing the relevant legal
provisions regarding occupational health and safety. The operator must ensure that the
measurement device is only used as intended and is operated in a fault-free, fully functional
condition.
The operator must:
• Know and implement the applicable occupational health and safety regulations.
• Ensure that the relevant task is only carried out by personnel who have the necessary
training, qualifications and authorization and who have been instructed about the
specific conditions at the location of the measurement device.
• Clearly specify and regulate personnel responsibilities regarding installation, operation,
maintenance and cleaning.
• Bear responsibility for the operation of the measurement device.
• Ensure that all employees have read and understood the parts of this documentation
that are relevant to their work. Provide personnel by Ryf with safety training at regular intervals; at
least once per year (1x / year).
• Ensure that the documentation is always in a legible condition and that it is fully accessible in the
immediate vicinity of the measurement device.
• Ensure that all of the safety and warning notices attached to the measurement device
are present, clean and legible.
• Ensure and regularly check that locally and nationally applicable safety, accident prevention and
environmental regulations are observed in addition to the occupational
health and safety regulations in these instructions.
• Provide personnel with the necessary personal protective equipment.
• Secure hazardous areas between the measurement device and operating equipment.
• Ensure that the measurement device is always in a perfect condition.
• Ensure that the functionality and completeness of the safety equipment is checked on
a regular basis.
3.2 Personnel requirements
The measurement device must only be operated by correctly trained personnel by Ryf AG.
Maintenance work must only be completed by specialized staff.
Work on electric components must only be carried out by an electrician from Ryf AG.