Ryf Ryeco RMM2010-CNC, Руководство по эксплуатации

Страница: 16 / 24

Operating Instructions Ryeco RMM2010 - CNC
Information on operating and handling the M3 measurement software is provided in the
supplied "M3" operating instructions.
7.2.1 Correct positioning of measurement objects
Depending on their shape and condition, measurement objects or workpieces should be aligned
at a right angle to the measurement table, as the measurement result may otherwise be distorted.
For this purpose, it may be sensible to mount or install holding devices or clamping
tools (e.g. stop bracket, prism, center supports) on the measurement table. The T-slots on the
measurement table or edges of the measurement table itself can be used as alignment aids.
8 Maintenance of the RMM2010 CNC
Only specialised staff is authorised to complete maintenance work on the measurement device.
Maintenance work must be completed in the presence of a person who is trained at Ryf Ltd. to operate the
measurement device. All of the work must be completed in accordance with applicable provisions and
protective regulations to safeguard any warranty claims.
The functional parts inside the device are cleaned as part of the maintenance/
inspection work completed by the Customer Services team at Ryf AG in Switzerland.
We recommend that the measurement device is checked, maintained and
adjusted, if required, on an annual basis (1 x / year). Please contact Customer
Services to arrange this (tel +41 032 654 21 04.)
The optical components (lens, condenser of LED transmitted light) should always be free from oil, dust and
finger prints. Therefore do not touch optical components directly with your hands. Only use a soft cleansing
tissue (e.g. "Kleenex® Original" or ask at Ryf Ltd.) to clean optical components.
The checks and maintenance work detailed in the following must be performed, without exception, at the
required intervals by specialised staff
8.1.1 Lubrication of guiding units
All of the guide units on the measurement table unit have highly accurate, pre-tensioned bearings.
They are sensitive to dirt, dust and humidity. Absolute cleanliness must therefore be ensured in the vicinity of
the guides. Check guide units once a year and lubricate slightly, if required. A grease gun is required for
certain work steps (a suitable adapter may be required for the lubricating nipple).