Rydia R790, Быстрый старт

Страница: 8 / 24

7: A�ach the camera to mount and
face it forwards. Keep the camera
as level as possible. (in a Truck or
Bus, aim the camera slightly down)
8: Plug the power cable into the
camera.
9: Plug the cable into the vehicle’s
accessory socket.
10: You are ready to start driving in
the knowledge that you are
protected by RYDIA Vision’s
complete video and data
protec�on.
Now you have the RYDIA Vision
camera installed, you can use the
RYDIA Vision app to see a live Image
from camera. Gently twist the camera
un�l you get a level, forward facing
image.
NOTE:
It is possible for the RYDIA
Vision camera to be hardwired to your
vehicle. RYDIA supply an op�onal
“Hard Wiring Kit” to allow for this. It is
recommended to have an authorised
vehicle electrician carry out this work.
We recommend connec�ng the
camera to an igni�on LIVE circuit so
the camera only operates when the
vehicle is running. Connec�ng to a
permanent “live” will make the camera
run 24/7 and this will reduce the life
expectancy of the MicroSD Card.
Some vehicles have “always on”
accessory sockets. We recommend
unplugging the camera from these
sockets when not in use.
Step 5
Step 6
Step 7
Step 9