On standby status, press " " for 3 seconds to go to the menu, press " " or " " to
select items. Press " " for 3 seconds to confirm selections and press " " to return.
Date / Time
Language
Beep Sound
TV Mode
Setup
Date / Time
Date / Time
Language
Beep Sound
TV Mode
Setup
English
Français
Español
Português
Language
[TV Mode]
set TV mode: PAL / NTSC;
[Frequency]
set frequency source : 50Hz / 60Hz;
[Parking Mode]
on/off, on means when ACC is on it comes to parking mode
automatically;
[Default Settings]
restore to factory settings: confirm / cancel; (Note: when choosing
"confirm," all parameters will be restored to factory default settings);
[Format]
used for storage of SD card format: Yes / No (Note: select "yes" will format the
SD card, remove the card of all documents, please be careful while operating);
[Version]
to check the software version of the product.
[G-Sensor]
off / low / middle / high;
[Beep Sound]
set sound of button-press to be on / off;
[Language]
set required language: English, German, French, Italian, Russian,
Portuguese, simplified, traditional Chinese, Japanese, Spanish;
Once get power from car charger, DVR will start automatically and enter into recording state.
ON/ OFF manually
ON/ OFF automatically
Put the SD card into the card slot follow the pointed direction, and you’ll hear a sound "ka."
Press the SD card to pull out the SD card .
When AV out connects to terminal DVD, the monitor of the unit will turn off.
Attention: please format your SD card before usage.
p
ower
key
SD
card
slot
Wiring Diagram
ACC
GND
AV OUT
DVD
BAT
fuse
GPS
Tips
Please make sure to connect the cables to car
Battery & ACC following the sketch,othewise,
may cause parking model to become invalid,
SD card full, file broken or wrong timing etc..
malfunctions.
Turn on the parking model (default is on ).
When ACC is off while recording, the motion detection with high sensitivity parking model will
turn on. Any movements or light changes within 3.5M will trigger recording and it will standby
automatically after 30s with no movement or light change.
When ACC is off while recording, the system will save current recording file and turn off automatically.
When on parking mode, the BAT Voltage Detection is on, once the voltage is under than 11.8V, the
system will save current recording file and turn off automatically.
Parking mode turn on
Parking mode turn off
BAT voltage detection
Connect to DVD
SD card usage
ON: press power supply key to turn ON the unit and the indicator will turn to green
;
OFF: press power supply key for 2 seconds to turn OFF the unit and the indicator will turn off;
2015
OPERATION INSTRUCTIONS
MAINTAINING YOUR DVR
