RVMP flexTEMP FG-SBMC-11, Оригинальное руководство пользователя

Страница: 13 / 34

INSTALLATION
DANGER
WARNING : Suffocation and/or Fire Hazard
Observe all installation material in accordance with governing codes and ordinances.
Failure to the follow all instructions will result in serious injury, property damage, or death.
The installation of this appliance, along with all subsequent components to support installation and operation of the
appliance, must conform with country, state and local codes. In the absence of such codes, refer to the latest editions of:
●
USA:
○
ANSI A119.5 - Recreational Vehicles (RV)− NFPA 1192 - Park Model RV
○
ANSI/RVIA LV - Low Voltage Standard− NFPA 70 - National Electric Code
○
ANSI Z223.1 - National Fuel Gas Code - NFPA 54
●
Canada:
○
CSA Z240 RV Series - Recreational Vehicles
○
CSA Z241 - Park Model RV
○
CSA C22.1 - Canadian Electric Code
○
CSA B149.1 - National Gas and Propane Installation Code
CAUTION
CAUTION : Always wear protective gear such as gloves, eyewear and clothing to avoid injuries
during installation and servicing of the product.
●
For Recreational Vehicle (RV) installation only!
NOTE : This water heater is certified ANSI Z 21.10.3 /CSA4.3-2017 for installation in Recreational Vehicles (RV) and is not for use in Marine or
Space Heating Applications. RV’s are recreation vehicles, having their own power or towed by
another vehicle, designed as temporary living quarters for recreation, camping, or travel use.
●
Any Installation must be performed by a qualified person, in accordance with this instruction manual.
●
DO NOT use test pressures higher than 40in-wc (1.45PSI) to test the gas leaks.
●
DO NOT attempt to modify the appliance.
●
DO NOT alter the appliance for a positive grounding battery system.
●
DO NOT move the appliance by grabbing the interior components.
●
Make sure all exhaust gases are directed outside the RV.
●
Protect all combustible material from the exhaust gases.
●
DO NOT draw air for combustion from occupied spaces.
●
Always disconnect the 12V appliance (to protect the control from surges that may occur) when performing Dielectric
(hi-pot) testing, welding, electrical, etc... work on the coach.
●
Only use with a proven 12V power source such as battery or approved converter.
12