Supported Discs
·Writeable DVD discs (DVD-RAM, DVD-RW, DVD-R) must be finalized, VR-mode only.
·Your player supports discs that are compatible with DVD-RAM Standard Version 2.0.
·Playback may not work for some types of discs, or when specific operations, such as
angle change and aspect ratio adjustment, are being performed. Information about
the
disc
is
written
in
detail
on
the
box
.
·Do not allow the disc to become dirty or scratched. Fingerprints, dirt, dust or scratches on
the recording surface may make it impossible to use the disc for playback.
·Windows Media Audio (WMA) files must be written to the disc with a .wma file extension in order
to be recognized and played back correctly.
·JPEG picture files must be written to the disc with a .jpeg or .jpg file extension in order to be
recognized and played back correctly.
4
S
up
p
o
rt
e
d
Di
s
c
s
Trouble
shooting
Check the following information for the possible cause and suggested solution(s) for a
problem before contacting Camec for service
.
The following symptoms do not indicate a problem with your player:
Regular
disc
rotation
sounds
.
Image
disturbance
during
search
.
Power
:
Problem:
No power
Solution:
Make sure that power is connected properly to the Blu-ray player. Check the
the fuses in the fuse box/filter in-line with the power loom at the back of the unit.
Problem:
The player switches to standby mode.
Solution:
After a period of inactivity, your player switches to standby mode automatically.
This is
a power saving feature.
If your player switches to standby mode unexpectedly, a safety function may have been
activated. Press STANDBY/ON on the front of your player.
Operation
:
Problem:
Remote control does not work.
Solution:
Make sure that you are pointing the remote control at the sensor on the front of
the unit or remote sensor.
Make
sure
that
there
are
no
obstructions
between
the
remote
control
and
the remote
sensor
.
Ensure
that
the
remote
control
sensor
is
not
exposed
to
direct sunlight or bright
light.
These can interfere with signal reception.
Problem:
Some or all functions do not work.
Solution:
Some functions are not allowed by the disc, for example, fast-forwarding through
the warning information at the beginning of the disc.
Condensation
may
have
formed
inside
your
player. Turn off your player and wait one
to two hours for the condensation to evaporate
.
Problem:
Playback fails to start or starts then stops even when play/pause is pressed.
Solution:
Make sure that the disc is inserted face up in the disc slot.
Make sure that the disc is not dirty.
The disc may be blank or incompatible with your player. Try another disc
.
Problem:
Start up is slow and audio and video output takes a long time to start.
Solution:
The power may have been interrupted or the power has just been connected.
19
T
rouble Shooting
Note: Your player can not write to discs.
Replace the battery.
Reset your player as per the instructions on the opposite page
.
