Prior to the setup of RVibrake3, remove all contents from the shipping
packaging:
Note
: If there is ANY shipping damage, immediately call RVibrake3 Customer
Service at 800-815-2159
1)
Power on the Command Center tablet and hub. To power the
tablet, press and hold the power button for 3 seconds. To power
the hub connect it to the provided USB charger.
NOTE
: See the Command Center User Guide for more info.
2)
Attach RVibrake3 claw to brake pedal.
3) (In this step, ignore the Audio Assistant on RVibrake3
during pairing process)
Plug in RVibrake3 to 12-volt outlet.
4)
On the tablet, click
Add Device
from the tablet
Dashboard
.
5)
On the new screen, enable RVibrake3 by toggling the on/off
slider to ON. At this time, the tablet will walk you through pairing.
6)
You will be asked to pair to RVibrake3 by taking a picture of
the
QR code
on the back of this User Guide.
Note
: Keep this User Guide in case of possible re-pairing in the
future.
Pairing Steps
RVibrake3 does
not
come paired with Command Center tablet and hub. The following
steps will walk you through the one time pairing process.
NOTE:
Pairing is not required for RVibrake3 to perform.
2
RVibrake3 SETUP
RVibrake3
Command Center
System
Breakaway System
Stop Plate
QR code
(example)
Boom! You’re a genius!
Before continuing we recommend watching our videos at rvivideo.com
OFF