RVE Merak E750, Руководство по сборке

Страница: 19 / 56

RVE MERAK E750 - ASSEMBLY INSTRUCTIONS
MAIN GEAR AND
AUTOROTATION BLOCK
ASSEMBLY (3-1)
The autorotation bearing block is
secured to the red aluminium core
with M3 x 5 mm screws with soft
threadlocker as shown.
Double-check the orientation of the
bearing block before tightening.
Use star-pattern tightening sequence,
increasing gradually the torque till the
recommended one.
This assures a perfect assembly with
no deformations.
The POM helical main gear is
secured to the red aluminium
core with M2.5 x 6 mm screws
using soft threadlocker.
Check the position and alignment
of the reinforcement ring before
inserting the screws.
As with the previous step, use
star-pattern tightening sequence,
increasing gradually the torque till
the recommended one.
***Recommended tightening torque:
1 Nm for the M2.5 x 6 mm screws
1.2 Nm for the M3 x 5 mm screws
19