Auto
: The unit will automatically heat and cool, depending on the set point temperature. (Heating only
functions on air conditioners with electric heat, heat pumps or vehicles with an auxiliary source of heat, e.g.
a gas furnace). Use the
UP
&
DOWN
buttons to select the desired set point temperature. In the Auto
mode, the fan speed is selected automatically. To advance to the Dry mode, press the
MODE
button.
Dry
: This mode is for dehumification when the vehicle is not in use. The unit will operate in the cooling
mode to provide dehumidification. Use the
UP
&
DOWN
buttons to select the desired set point
temperature. If the room temperature in is above the set point, the unit will operate for 15 minutes and then
turn off for 3 minutes. If the room temperature is below the set point, the unit will operate for 6 minutes and
then turn off for 15 minutes. In the Dry mode, the fan speed is selected automatically. To advance to the
Fan mode, press the
MODE
button.
FAN
: The indoor fan is run to circulate air, but the compressor does not operate. In the Fan Mode, two fan
selections are available: High speed continuous or Low speed continuous. Use the
FAN
button to select.
VII.
Follow Me
In normal operation a temperature sensor in the ceiling assembly senses the temperature and controls the
operation of the Air Conditioner or Heat Pump. Follow Me switches this control to a temperature sensor on
the hand held controller. To activate Follow Me, press the
Follow Me
button for 3 seconds and release. On
or Off will flash on the screen. Press the
Follow Me
button again to change the setting. In Gas heat mode,
Follow Me is automatically turned on.
VIII. F/C
Selects whether the temperature is displayed in Fahrenheit or Celsius. Press and hold the
F/C
button for 3
seconds and release. CEL or FAH will be displayed. Press the
F/C
button again to change the selection.
IX.
Time and Day Set Up
Press the
CLOCK
button and hold for 3 seconds.
The hour and AM or PM will flash. To change the hour, press the
UP
or
DOWN
button.
To change the minute, press and release the
PROGRAM
button. To change the minute, press the
UP
or
DOWN
button.
To change the day, press and release the
PROGRAM
button. To change the day, press the
UP
or
DOWN
button.
Press the
CLOCK
button to return to the normal screen.
X. 7-Day Programming
The 7-day program schedule allows different set point temperatures for different times of each day of the
week. The schedule includes four periods– Morning, Day, Evening and Night- for each day of the week.
Each period has a start time, a set point temperature for Heat, Cool and Auto modes. For 7-day
programming:
Press the
CLOCK
and
PROGRAM
buttons simultaneously and hold for three seconds.
The first selection is for the day of the week. Press the
UP
or
DOWN
button to select Monday (MON).
Press the
PROGRAM
button to select the settings for the Morning period. Press the
UP
or
DOWN
button
to select Morning.
Press the
PROGRAM
button to select the hour for the period to begin. Use the
UP
and
DOWN
button to
select the hour.
Press the
PROGRAM
button to select the minute for the period to begin. Use the
UP
and
DOWN
button
to select the minute.
-6-