Rutland FM1803-2
Installation & Operation
Document No: SM-146 Issue D 14.03.08
Marlec Engineering Co Ltd
3
INTRODUCTION
This manual contains important information concerning your Rutland FM1803
Series 2 Windcharger system and its installation and operational characteristics.
It is strongly recommended that you read this manual and familiarise yourself with
its contents before installing and operating the Windcharger system.
The Rutland FM1803 Series 2 Windcharger is designed to provide a direct current
(DC) power supply via a battery bank for low voltage equipment, lighting, inverters
etc. in domestic and professional applications.
WARNING!
When turning, the Windcharger is capable of generating voltages in excess of
the nominal voltage Caution must be exercised at all times to avoid electric
shock.
Never disconnect the batteries from the controller when the turbine is running.
The wind generator must never be operated on open circuit, (ie without control
unit connected, since hazardous voltages can be generated.
No attempt to work on the system should be made until the wind generator is
restrained from turning.
The Windcharger is fitted with ceramic magnets which can be damaged by
heavy handling. The main generator assembly should be treated with care
during transit and assembly.
It is essential to observe the correct polarity when connecting the Windcharger
and all other components into an electrical circuit. Reverse connection will
damage the Windcharger system and invalidate the warranty.
.
Do not adjust the settings on the control unit without reference to the
manufacturer.
If in doubt, refer to your dealer, a competent electrical engineer or the
manufacturer.
