Wall Mounted DoublePremium Pergola
4
Step 9
Step 10
Take the completed assembly and turn it over to
commence fitment of the second runner and brace.
IMPORTANT NOTE
- on the inner face of the runner
notches you will find one marked with a star - these
should always be placed at the same end of the assembly.
Place the next runner as you did previously, carefully
aligning it, prior to attaching to the post and brace as
before.
Step 11
Step 12
Using your assistants, lift the frame assembly into the
vertical position, aligned with the runner and
approximately the length of a rafter from the wall.
Now lift the first pre-drilled rafter into place, slotting each
end into the outermost slot in the runner/wall plate (if the
joint is tight use a mallet or hammer with wood block to
gently tap the rafter into place)
…