Wall Mounted DoublePremium Pergola
2
Step 1
Step 2
Check that you have the correct components as shown in
the package contents, including any fixings.
Begin by taking the pre-drilled wall plate with the slots on
the top edge and place it horizontally (use a spirit level or
laser) on the wall where you would like the pergola
located. Mark the hole positions for your wall fixings then
drill and fix in place. Note: The distance from the
underside of the wall plate to the floor is 256cm.
Next, lay two of the posts on a flat surface as shown and
then place one of the runners, countersinks uppermost,
on top of the posts with the outer notches over the post
as shown.
Step 3
Step 4
At this point ensure that the post is aligned between the
notches, flush with the top edge of the runner and
perpendicular to it.
Now insert a 70mm coachscrew into one of the holes in
the runner and drive it into the post using a socket and
ratchet or driver until almost fully home.