Rutenbeck TCR IP 4, Руководство по эксплуатации

Страница: 4 / 8

4
Figure 3
Increase the access protection of
you network connection through
an individual user name and
password in the field „configura-
tion” (figure 3, 1).
Once a password has been cho-
sen, the user name and pass-
word will be required to have
access to the website.
The user remains logged in until the browser will be switched off.
Three categories are possible:
1 Neither “administrator name”
nor “user name” has been
saved: everyone has full ac-
cess to all functions.
2 Only “administrator name”
has been saved: everyone
can access the website and
perform the manual switching
functions. The “network confi-
guration” can only be done
from the administrator.
3 An “administrator name” and
a “user name” have been
saved: the “administrator” and
the “user” can access the
website and perform the ma-
nual switching functions. The
“system settings”, the setting
of the switch-time and the
configuration can only be
done from the administrator.
You can assign individual names
for the four outputs, which are
found in the menu bar.
With “send” the configuration will
be saved.
1
Settings
The factory settings of the deli-
very state can be replaced with
individual settings. In order to
reload the factory settings, sepe-
rate the TCR IP 4 from the 230- V-power supply.
Press both push-buttons of the
device and switch on the device
with pressed buttons.
After about 3 seconds the LED starts blinking to indicate that the
factory settings have been resto-
red.
1-4 : Switches the connected
devices directly on or off.
By pressing both push-
buttons 1 and 2, the
factory settings will be
restored (see above).
1-4 : Indicates the switching
state of the connected
device. It lights up if the
connected device is
switched on.
Link : It indicates the link. The
LED lights, if a network
connection exists.
Act : It indicates the activity of
the network connection
and flashes, if a user has
accessed the home of
the TCR IP 4.
Push-buttons
Operating Elements
Factory Settings
LEDs
The outputs of the TCR IP 4 can
be switched directly with the in- tegrated push-button or from the
website of the TCR IP 4. A connected temperature sensor
displays the actual temperature on the website.
Configuration