iNtRODuCtiON
this operation and maintenance manual is furnished with each
Rustibus® 25
Miniblaster unit. it outlines
general equipment use and the operation and maintenance requirements for efficient and safe
operation.
READ ALL iNstRuCtiONs AND DAtA iN tHis OPERAtiON AND MAiNtENANCE MANuAL PRiOR tO
OPERAtiON OF tHis EQuiPMENt.
these instructions are for your protection and convenience. Please read them carefully since failure to
follow the precautions could result in injury.
Whenever using powered equipment, basic safety precautions should be followed.
if after reading this manual anything seems unclear, contact a Rustibus iNC (Dss) directly by dialing
+1 832 203 7170.
GENERAL DEsCRiPtiON
the
Rustibus® 25
Miniblaster is an easy to handle, light weight surface preparation tool with a lot of
power. this versatile piece of equipment utilizes a variety of abrasives from wire brushes, coating removal
discs to erasers for removal of adhesive products.
tECHNiCAL DEtAiLs
Length:
275 mm / 11”
Length w/wheel:
325 mm / 13”
Height:
150 mm / 6”
Height w/handle:
240 mm / 9,45”
Width:
80 mm / 3,15”
Width w/handle:
175 mm / 6,89”
Total Weight
: 1,5 kg / 3,2 lbs
Air Cons:
113 LPM / 4 CFM
Work press:
6,3 bar / 90 psi
Air inlet:
1/4”
RPM:
3500
Noise level
*
:
83 db
Vibration:
2,42 m/s²
*
Noise level dependent on surface.
