
5
FIREPLACE INSTALLATION
WARNING! The heater in the electric fireplace is not equipped with a device to control
the room temperature.
SITE SELECTION
NOTE!
A 230 Voltage circuit is required. A dedicated circuit is preferred but not necessary
in all cases. A dedicated circuit will be required if, after installation, the circuit breaker
trips or the fuse blows on a regular basis when the heater in the electric fireplace ope-
rating. Additional appliances on the same circuit may exceed the current rating of the
circuit breaker.
WARNING! Ensure the power cord is not installed so that it is pinched or against a
sharp edge and ensure that the power cord is stored or secured to avoid tripping or
snagging to reduce the risk of fire, electric shock or injury to persons.
Construction and electrical outlet wiring must comply with local building codes and other
applicable regulations to reduce the risk of fire, electric shock and injury to persons.
Do not attempt to wire your own new outlets or circuits. To reduce the risk of fire, electric
shock or injury to persons, always use a licensed electrician.
WARNING! In order to avoid overheating, do not cover the heater.
NOTE!
For safety reason, please ensure the vent on heater is not less than 150cm away
from other objects.
Model Number
9065-1097
Description
Electric fireplace
Voltage
230V~50HZ
Watts
900/1800W
TECHNICAL DATA
Содержание 90651097
