RUSTA 900101220101, Руководство пользователя

Страница: 5 / 28

5
HOW TO OPERATE
Before first use, clean the inside of the unit by wiping with a moist, non-abrasive sponge,
towel or cloth and then wipe with a non-abrasive dry towel. Wipe down the inside of the
kettle and be sure it is properly placed in the brackets before starting.
1. First find a flat surface near an electrical outlet before starting. Make sure that your
cord is away from any water source. It is acceptable to use an extension cord if needed.
2. Gather your popcorn making supplies: popcorn, seasonings, bowls or bags for holding
the popcorn, cooking oil, kernel measuring cup (½dl) and oil measuring spoon (1
tbsp.) (Kernel measuring cup and oil measuring spoon are included with your unit).
3. Plug in the appliance while switch is flipped to OFF position.
4. Make sure that kettle is properly secured in support brackets.
5. Make sure kettle motor is plugged in
6. Turn appliance ON by flipping the switch on the top of the machine. Allow the
appliance
to run 3–5 minutes to heat up kettle.
7. Turn unit OFF
8. Use the oil measuring spoon (1tbsp) supplied with your kettle popcorn popper to
add 1 tablespoon of your favorite popcorn cooking oil to the kettle. For best popping
results, it is suggested to use light vegetable oil.
9. Add 1 cup of popcorn kernels using the supplied kernel measuring cup..
10. Turn the unit ON and close the door. In no time at all, you will hear the popping begin. Fresh,
hot popcorn will begin to burst out of the flip lids on the kettle – just like at the theater!
11. Once the kernels have stopped popping, tip the kettle using the red knob on the crank
handle to release the popcorn.
IF SMOKE OCCURS!
If your kettle popcorn popper begins to smoke during cooking. It may be due to grease build up.
In order to reduce smoking, make sure that you clean the inside of the kettle between uses.
CLEANING & MAINTENANCE
1. Make sure appliance is unplugged before cleaning. Unplug the appliance from the
wall socket.
2. Use slightly damp, non-abrasive sponge, towel or cloth to wipe down the inside and
outside of main unit, then wipe with a non-abrasive towel to dry.
3. Use a slightly damp, non-abrasive sponge, towel or cloth to wipe the kettle. Wipe with
a non-abrasive to dry the kettle.
NOTE! Do not try to detach the kettle.
4. Unplug kettle motor and remove kettle from support brackets.
NOTICE!
To protect the motor plug from getting wet, never immerse the kettle in any
liquid. Never place any parts in the dishwasher. Always wash by hand.