10
ENG
WARNING!
• Don’t touch any substance that may be leaking out from the battery.
• Don’t let kids and pets touch or play with the battery. Please unplug the charger before
driving or installing the battery. It’s very dangerous to operate the Hoverboard when
charging.
• Battery contains dangerous substances, please don’t open the battery package and
insert any items or attempt to repair the battery.
BATTERY CHARGING
• Always charge the Hoverboard under supervision, and never during the night or when
you are not home.
• Always charge the Hoverboard according to the instructions supplied with the CE-
marked charger.
• The Hoverboard should be turned off during charging.
• Give your Hoverboard time to cool down for about 1 hour after use, and before charging.
• It is important to ensure that the charging plugs are clean and dry before charging to
prevent short circuits.
• Once the battery is fully charged, stop charging by unplugging the charger from the
wall socket and the Hoverboard.
• Remember to hold the charging plug and pull it straight out of the Hoverboard without
twisting the plug/cable to avoid damage.
• Always charge the Hoverboard after use, partly to prevent discharge of the battery
and also so that it is fully charged and ready for use.
• If you do not intend to use your Hoverboard for a while, charge it up and recharge
every three months in order to prevent damage due to discharge.
• If your Hoverboard signals low battery, stop using it and charge it to prevent damage
to the battery and the risk that the Hoverboard will cut out abruptly during use.
HOW DO I CHARGE MY HOVERBOARD?
• Start the charger by plugging it into a wall socket (230V).
• The charger’s LED will now turn green to indicate that it is on.
• Then connect the charger to your Hoverboard.
• Make sure that the plug is positioned correctly in the guide
slot, otherwise the plug and Hoverboard may be damaged.
• The charger will now switch to the red light to indicate that it
is charging.
• Once the Hoverboard is fully charged, the LED will change to green again.
• Charging is now complete. Unplug the charger from the wall socket and Hoverboard.
• The charging time is approximately 2–3 hours.
IMPORTANT!
Important! Pull the charger plug straight out from the Hoverboard,
without tilting the plug/cable itself..