5
4. Unlock and remove the piercer from
the hose. You should now see a clear
hole in the hose.
a. Take a sprinkler and press firmly
down into the newly made hole in
the hose.
b. We recommend that you attach a
ground peg after each sprinkler to
ensure that they do not move.
Continue with the above steps along
the length of the hose where the sprin-
klers are to be placed.
4a
4b
5. T-connectors or joint couplings are re-
quired to expand the system (included)
a. The T-coupling can be used to
expand the system in different di-
rections or to expand your system.
b. The joint coupling is used if you
need to extend your system. This is
used if you want a longer hose on
fewer sprinklers or if you want to
combine several sprinkler sets.
5a
5b
6. The system must always end with an
end plug.
7. These can be moved if you want to
change the position of an individual
sprinkler.
a. Remove the sprinkler from the
hose.
b. Insert a hole plug.
7a
7b
