LIST OF CONTENTS
3 x 2
4 x 6
5 x 12
6 x 8
Not included
1. Cover
2. Steel shelf
3. Top connector
4. Long tube
5. Short tube
6. Side connector
1 x 1
2 x 3
• Always place the product on a flat, even and stable surface.
• Check the product at least monthly to ensure all parts remain fully in place.
CARE AND MAINTENANCE
• Check the product regularly for signs of instability or wear. Do not use the product
if it is damaged or shows signs of instability.
• Clean the product by wiping it with a soft, damp cloth. Do not use an abrasive cleaning
agent to clean the product. Wipe dry with a soft cloth.
• All parts of the greenhouse must be wiped down and dry before storage.
• Please store the greenhouse in its original packaging.
• During the winter the greenhouse must be dismantled and stored indoors.
INFORMATION ON METAL CORROSION
Rust and corrosion are unavoidable when metal products are used outdoors. Rust and
corrosion are due to chemical reactions between oxygen and water on metal. All metal
rusts or corrodes in some way over time when exposed to water and pollutants.
To avoid rust and corrosion.
• Protect the product against rain and pollutants as much as possible in storage.
• Avoid metal products coming in contact with each other or dragging the product
across concrete/tiled flooring. Any scratch in the coating helps water penetrate
and come in contact with the metal, which can lead to corrosion.
• Wash the product with hot, soapy water and a soft brush every 3–4 weeks, and
before storing. Rinse the metal thoroughly and then dry with a soft cloth.
• If, despite careful cleaning, surface rust starts forming on the metal, address this
as soon as possible to avoid it spreading. First remove the cover and clean the area
where surface rust has formed before treating with rust remover. Avoid getting rust
remover on the plastic parts. Then repaint the surface with a suitable paint.
Contact your local paint store for advice on which products to use.
3
