Russound XSource, Руководство по установке

Страница: 18 / 20

18 Russound XSource Installation Guide
SAFETY INSTRUCTIONS
Warning: Any changes or modifications to this unit not
expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of
or more of the following measures: reorient or relocate the
receiving antenna; increase the separation between the
equipment and receiver; connect the equipment into an
outlet on a circuit different from that to which the receiver
is connected, or consult the dealer or an experienced radio/
TV technician for help.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
1. Read Instructions - All the safety and operating
instructions should be read before the equipment is
operated.
2. Retain Instructions - The safety and operating
instructions should be retained for future reference.
3. Heed Warnings - All warnings on the equipment in the
operating instructions should be adhered to.
4. Follow Instructions - Follow all operating and user
instructions.
5. Water and Moisture - The equipment should not be
used near water; for example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a
swimming pool.
6. Mounting - The equipment should be mounted or
secured as recommended by the manufacturer.
7. Heat - The equipment should be situated away from
heat sources such as radiators, heat registers, stoves, or other
equipment (including amplifiers) that produce heat.
8. Power Sources - The product should be connected to
a power supply only of the type described in the operating
instructions or as marked on the equipment.
9. Grounding or Polarization - Precaution should be taken
so that the grounding or polarization means of the product
is not defeated.
10. Avoid spills and foreign objects - Ensure liquids and
objects don’t get into the product enclosure through any
openings.
11. Damage Requiring Service - The equipment should
be serviced by qualified service personnel when: the power
supply cord or the plug has been damaged; objects have
fallen, liquid has been spilled into the equipment; the
equipment has been exposed to rain; the equipment does
not appear to operate normally; or the equipment has been
dropped or the enclosure is damaged.
12. Servicing - The user should not attempt to service
the equipment beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
13. Care – From time to time you should wipe any dust
accumulation from the equipment with a soft dry cloth.