Russound MCA-88, Руководство по установке

Страница: 13 / 24

13
Russound MCA-88 Installation Manual
BLUETOOTH® AND DIGITAL INPUTS ETHERNET CONNECTION AND FACTORY RESET
CAT-5
Phone or Tablet
MCA-88 Controller
BTC-1X
Optical
Bluetooth Connection (Optional)
The MCA-88 supports a connection for the optional Russound BTC-1X
Bluetooth module. The BTC-1X Bluetooth module can be located up to 300 feet
away from the MCA-88 using CAT-5 wire terminated via T568A, allowing the
user to connect their smartphone or tablet via Bluetooth within range of the
BTC-1X in their living area while the MCA-88 is remotely located.
The Bluetooth connection takes up Source #1. If the Bluetooth connection is not
being used then Source #1 can be configured for a different analog source type.
Digital Audio Inputs
The MCA-88 supports digital source inputs, for both coaxial and optical
audio connections. Sources 3, 4, and 5 are available as either analog or digital
inputs. The Web-SCS or SCS-C5 software enables you to designate whether to
use the analog connection or the digital connection for each source. Source 5
has three connection options: analog, coaxial, or optical. Use only one type of
connection for each source.
Factory Reset
The factory reset button has two functions. A 3-second press and hold will
restore network settings to DHCP. A 10-second press and hold will reset the
controller to its factory default settings.
Note: A unit that has been reset to factory default will have no configuration
and will need to be unlocked and reconfigured by a Russound Certified
Installer.
Ethernet Connection
The Ethernet connection is used for configuration and programming as well
as for enabling control via the MyRussound App. The default network setting
is DHCP-enabled, but it may be configured with a static IP address using the
SCS-C5 software or Web-SCS.
The Ethernet connection is required for for communication and control of
Russound IP-compatible such as the DMS-3.1.