21
Russound A-C68 Installation Manual
Controller Link In/Out
NOTE:
The Controller Link Out of the LAST controller must be connected with
a CAT-5 straight-through patch cable to the Link In of the FIRST controller to
complete the communication link.
The Control Link In and Out are used to connect up to six A-C68 controllers.
The Control Link In and Link Out jacks pass Status and the six source IR signals.
These link ports also communicate the two-way event driven commands
between controllers.
NOTE:
The Control Link In and Out are for A-C68 controllers only.
The connection is made using a CAT-5 patch cable from the Link Out of the
first A-C68 and into the Link In of the next controller. The link cable should not
exceed six feet in length.
Source Audio Loop Out
The A-C68 has six buffered, fixed-level audio source loop outputs. This source
loop configuration allows the A-C68 to pass source signals to another controller
for sharing sources in a multiple controller system.
The Source Loop Outputs are located directly to the right of the Source Audio
Inputs. Use quality RCA signal cables to ensure quality transference of audio
signals.
A-C68
C
AT-5 Cable
A-C68
CD
IR emitter
IR emitter
RCA
cable
RCA cable
CAT-5 cable
MULTIPLE CONTROLLERS
