5.2. USE OF HOTPLATES
The hob part of the appliance is controlled via knob with 7 positions on the control
panel. Position ''0'' means off position. The remaining 6 positions indicate the
following types of use:
1 : Heat maintenance position
2-3 : Heating in low temperature position
4-5-6 : Cooking, frying and boiling position
The knob rotation direction may differ according to the product specification.
Surfaces of hotplates are covered by a protective layer. At first use, operate the
hotplates without a pan at level 3 for 5 minutes.
Recommendations:
Pans with flat bases.
he size of the pan must be in line with the size of the hob heating elements for most
efficent usage.
Always center the pan on the heating element.
Using small sized pans on large sized heating elements will cause heat loss and so
energy will be wasted.
•
• T
•
•
For Customer Services, Spare parts & Warranty Information please call 0845 683 8717
-10-
•
•
•
• Do not let children come close to the appliance during usage or immediately after.
• Clean the electrical cooker with a wet cloth when the cooker has cooled. If there is
an excess amount of dirt, you can clean it with detergent.
Heat for w few minutes for the upper part to dry after cleaning.
After using any hob, please make sure that it is switched off.
Never touch any heating element, after it is turned off, because it keeps the heat for
a certain period.
Some ceramic models may a have hot surface warning light.
CORRECT
WRONG
pot bottom is round
WRONG
pot buttom is small
WRONG
pot buttom does not sit well
