Russell Hobbs RHSB 025, Инструкции и гарантия, Страница: 6 / 12

SUGGESTIONS FOR USE
Move the blending arm gently around the mixture to ensure
uniform results.
If you want to clean the sides and base of the utensil/container
with a hand-held utensil, first switch the machine OFF.
To avoid unnecessary splashing, immerse the blending arm into
mixture before switching the appliance ON.
The speed can be adjusted at any time. First, release the ON/OFF
button, and then adjust the speed. For thicker mixtures, a low
speed is recommended. For fine consistency, use the high-speed
settings.
CLEANING
NOTE: Use extreme care when handling the blade at the bottom of the
blending arm. Do not touch the blade with your fingers. The blade is very
sharp and can cause injury.
Make sure the unit is unplugged from the main power supply.
Disconnect the blending tool from the motor.
It is much easier to clean the accessories directly after their use.
Wash in warm, soapy water, rinse and dry well.
The beaker must be washed with luke warm water.
The body of the stick blender can be cleaned with a damp cloth,
and must immediately be buffed with a dry cloth.
The blending arm can be washed in warm soapy water or can be
washed in the dishwasher.
To remove stubborn spots, wipe the surfaces with a piece of cloth
slightly dampened in soapy water or a mild non-abrasive cleaner.
Follow with a clean damp cloth.
When processing foods with colour (e.g. carrots), the parts of the
appliance may become discoloured. Wipe these parts with
vegetable oil before placing them in the dishwasher.
Do not use any abrasive cleaning material to clean any part of the
stick blender, as it will harm the exterior.
Store in a cool dry place.
CAUTION: The stick blender motor should never be submerged in water
or held under a running tap. To clean, simply wipe with a damp cloth
and dry thoroughly.
6