If you wish to operate the unit without the need to empty the water tank, please:
Remove the drain knob and rubber
plug and retain for future use.
Connect the drain tube supplied to the
water outlet as shown and locate the
other end into a drain.
FIG.17
The drain tube may be extended
by adding an extension tube and
using a suitable connector.
FIG.18
Please note
1.
The drain must be at or
below the outlet level.
2.
Flashing comp / „full water‟
indicator will not function in
this mode of drainage.
3. If you want to extend the
water tube, you can connect
it with another tube (OD:
18mm)
FIG.19
