NOTICE !
1.
To prolong the compressor's life, after switching-off of the unit, please wait for 3 minutes (at least)
before re-switching it back on again.
2.
The cooling system will switch off if the ambient temperature is lower than the set one. The
ventilation, however, keeps working on the set level. If the ambient temperature rises above the
selected level, the cooling will return to work.
DRAINAGE
During the process of cooling, some water will be extracted from the air into the unit. If the reservoir
is full,
both of the compressor and motor will stop. The
“water full” sign will light up, also the
machine will beep as a reminder.
To make the cooling function work again, please empty the water tank by one of the following ways:
1.
Turn off the air conditioner and avoid
moving it when full.
2. Position a container (a water tray for
example) underneath the drain hole.
3. Remove the drain knob & rubber plug
from the drain hole and allow the water
to drain out.
4.
When the container is almost full,
replace the rubber plug in the drain
hole and empty the water tray.
5.
Repeat until the unit is emptied.
6. Replace the rubber plug and tighten
the drain knob firmly.
7. Switch on the unit - the full water or
compressor operating indicator should
not be flashing.
FIG.16
