6
Setting the temperature
If you want to change the set temperature press the or -button. The 2 digit display will
indicate the set temperature.
Note:
Reaching the set temperature depends on the room and outdoor climatic conditions.
Mode
Pressing the -button to switch the operating mode between 'cooling' and 'fan only'.
Fan speed
If you prefer a constant fan speed instead of the auto fan speed, press the -button
successively; the fan speed icon on the LCD-display will rotate accordingly.
• Fast
- for the turbo speed
• Normal - for the medium speed
• Slow
- for the slow speed
• Auto
- alternating fast and slow speed
Timer
For all of the following TIMER programming, proceed firstly
with these standard steps:
• Press the -button briefly; the 2 left digits of the 4 digits on
the LCD display are flashing.
• Press or to adjust the hour.
• Press the -button briefly again, the 2 right digits of the 4
digits are flashing.
• Press or to adjust the minutes of the clock in intervals
of 5 minutes. The timer is set. After 10 seconds the time
display returns.
Programming the timer for ON - when the unit is OFF.
• Perform the standard steps as described above.
The linear time scale will be on between the ON programmed times until 24:00. The
flashing bar on the time scale indicates the real time and moves a segment ahead every 30
minutes until it reaches the ON timer time, then the black segments in the linear time scale
will disappear.
Programming the timer for OFF - when the unit is RUNNING.
• Perform the standard steps as described above.
The linear time scale will be on between the present time to the OFF programmed time.
The flashing bar on the time scale indicates the real time and moves a segment ahead every
30 minutes until it reaches the OFF timer time, then the black segments in the linear time
scale will disappear.
Repeated OFF and ON
Programming the timer for repeat OFF and ON - when the unit is RUNNING.
• Perform the standard steps as described above.
• Repeat the above procedure while the digits are still flashing for setting the ON.
The linear time scale will be ON between 00:00 to the time set with the timer to OFF and
5JNFSFYBNQMF
ON
OFF
ON
OFF
