
Inlet hose
1. Connect the inlet hose to the connector on the water
valve.
2. Apply inlet hose to a water tap with cold, fresh
water.
Note:
Use the hose-set supplied with the appliance - old
hose-sets should not be reused.
1.
2.
Drain Hose
1. Use the drain hose bracket to keep the end of the drain
hose retained and prevent the outflow of water. Do not extend
the length of the drain hose; if an extended hose is required,
please consult an approved technician.
2. The height of the drainage outlet must be 80-100 cm. Fix
the drain hose to the clip at the back of the washing machine
to prevent it from dropping off.
1.
Note: the drain hose should not be submerged in water
and should be securely fixed and leak-free. If the drain
hose is placed on the ground or if the pipe is at a height of
less than 80cm, the washing machine will continuously drain while being filled (self-siphoning).
Connecting to the power supply
Before connecting to the power supply, check:
- The socket is adequate for the maximum power of the washing
machine
- For safety, fuses in the power circuit should be rated for
no less than 15a.
- The voltage should meet the requirement.
- The power outlet should be capable of accepting the
washing machine plug.
- Connect the machine to an earthed
socket outlet.
8 0 - 1 0 0cm
Installation Continued
For Customer Services, Spare Parts & Warranty Information please call
0845 683 8717
-7-