Anti-Scale System
The anti-cal system is designed to reduce the build up of lime scale, which
occurs during steam ironing. This will prolong the working life of your iron.
Anti-Drip Feature
1.
The automatic Anti-drip system is designed to prevent
water escaping from the soleplate when the iron is too
cold.
2.
During use, the anti-drip system may make a loud
clicking sound, particularly during heat-up or whilst
cooling down. This is perfectly normal and indicates that
the system is functioning correctly.
Draining the Water & Storage
Instructions
1.
Move the Steam Control/Self-Cleaning Knob to
position.
2.
Disconnect the iron from the mains supply outlet.
3.
Press the Burst Of Steam button to release any
trapped water when the soleplate is still hot.
4.
Press the Spray Buttons to release any trapped water.
5.
Hold the iron upside down and gently shake it to remove the remaining
water.
Note:
Set the Steam Control Knob To position before storing the iron.
It is recommended to drain the water from the iron as this will reduce
calcification and lime build up in the steam chamber.
Cleaning
1.
Disconnect the iron from the mains supply outlet.
2.
Use a damped cloth or non-scratching cleaner to remove any deposits on
the sole plate or the cabinets.
Note:
Never use sharp or rough objects to remove the deposits on the soleplate.
Never use any abrasives, vinegar or de-scaling agents to clean the iron.
PAGE 9 OF 12
