7.
Move the Variable Steam Control/Self-Cleaning Knob to give the desired
amount of steam.
8.
Turn the Temperature Dial in an anti-clockwise direction to ‘Min’; the
iron is switched off.
9.
Disconnect the iron from the mains supply outlet.
10.
When the iron completely cool down, store it in a vertical position in a
cool and dry place.
Note: Set the Steam Control Knob to position after use.
Burst of Steam Function
This function provides an extra amount of steam to remove stubborn
wrinkles.
1.
Fill the iron as described in the section of How To Fill the tank with
Water.
2.
Turn the Temperature Dial to the
●●●
(3 dots) setting.
3.
Pilot light glows indicating the iron is switched on.
4.
Pilot light goes off when the required temperature is reached.
5.
The iron is ready for use.
6.
Press the Burst Of Steam Button once.
7.
Steam will shoot out from the holes of the soleplate into the
fabric being ironed, removing the wrinkles.
8.
For stubborn wrinkles, wait a few seconds before pressing the Burst Of
Steam button again. Most wrinkles can be removed within three presses.
Note:
It may be necessary to press the burst of steam button a few times to start
this function.
For optimum steam quality, do not operate the Burst Of Steam more than
three times after the pilot light goes off.
Vertical Burst of Steam Function
Warning:
Do not apply steam on any clothes or fabrics whilst being worn by humans or
pets. Temperature of steam is very high.
This function provides an extra amount of steam to remove
wrinkles on delicate garments in hanging positions, hanging
curtains, or other hanging fabrics.
1.
Fill the iron as described in the section of How To Fill Tank with
Water.
STEAM-OFF
STEAM-MAX
PAGE 7 OF 12
