background image

IMPORTANT SAFEGUARDS

When using this appliance, basic safety precautions should always be followed, including the following:
Read all instructions before, and follow whilst using this appliance.

1. 

To protect against electric shock do not immerse cord, 

plug or motor unit in water or liquid.

2. 

Do not use outdoors or in damp or moist areas.

3. 

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction 

concerning use of the appliance by a person responsible for their safety.

4. 

Always switch off and disconnect the appliance from the wall power outlet before assembling, disassembling or 

cleaning.

5. 

Always switch off and disconnect the appliance from the wall power outlet when not in use.

6. 

To disconnect, press the PULSE|STOP button to turn the unit off. Switch off the wall power outlet, then grasp 

the plug and pull the plug from wall outlet. Never pull by the cord.

7. 

Do not operate any appliance with a damaged cord or plug or after the appliance has malfunctioned, or has 

been dropped or damaged in any manner. Contact customer service for replacement, examination, repair or 

adjustment.

8. 

There are no user serviceable parts. If the power cord is damaged, it must be replaced by the manufacturer or 

a suitably qualified person in order to avoid a hazard.

9. 

Do not use this appliance for other than its intended use. Using this appliance for other than its intended 

purpose may result in personal injury.

10. 

Use only the accessories supplied with this appliance. The use of accessory attachments not recommended by 

the appliance manufacturer may cause injuries.

11. 

Do not use on an inclined plane or unstable surface.

12. 

Keep the appliance and power cord away from the edge of tables or countertops and out of reach of children 

and persons with disabilities.

13. 

Do not place on or near any heat surfaces.

14. 

The motor will only operate once the processing bowl, lid and large food pusher have been securely fitted onto 

the motor unit.

15. 

Do not operate the food processor with an empty bowl.

16. 

For your safety, do not process liquids/foods that are hotter than 40°C. Allow boiling liquids to cool before you 

pour them into the food processor bowls.

17. 

Keep hands and utensils away from moving blades or discs while processing foods to prevent the possibility of 

severe personal injury or damage to the Multi Processor. A scraper may be used, but it must be used only 

when the food processor is not running.

18. 

Wait until the blades come to a complete stop before removing the lid from the jug, and before removing the 

jug from the motor unit.

19. 

Cutting blades are very sharp. Care must be taken when handling the sharp cutting blades, when emptying the 

bowl and during cleaning.

20. 

This appliance must be monitored when in use. Do not leave the appliance unattended when switched on.

21. 

To reduce the risk of injury, never place chopping blade or disc on the motor unit without first fitting the bowl 

securely in place.

22. 

Be certain the lid is securely locked in place before operating appliance.

23. 

Do not run the motor for longer than 1 minute. After 1 minute, switch off for at least 2 minutes to allow the 

motor to cool down.

24. 

Never feed food into chute by hand. Always use the food pusher.

25. 

DO NOT attempt to defeat the lid interlock mechanism.

Содержание RHFP6010AU





































Отзывы: