4
5
BEFORE USING FOR THE FIRST TIME
Check to confirm you have unpacked all of the components of your vacuum cleaner:
- Vacuum cleaner body
- Flexible hose
- Extendable tube
- Combination floor tool
- Crevice tool with small brush
- Turbo floor tool
- Mini pet turbo tool
FITTING THE HOSE
• Push the hose end into the inlet. You will hear a click as it locks into position.
• Give it a gentle tug to check it is properly locked.
POWER CORD
• Pull as much cable as you need from the back of the cleaner.
• A yellow band around the cable will appear when there is approximately one metre of
cable left.
• Stop pulling when the red band around the cable appears. This indicates that you are
approaching the cable limit.
CAUTION:
Avoid extending the power cord past the red band. Pulling beyond this may result in
damage to the cord connection.
• When vacuuming larger spaces and multiple rooms you may need to turn the vacuum off
and select another power outlet.
• Avoid tangling the power cord around furniture and other obstacles as it may become
a tripping hazard to you and other people.
CARRYING AND MOVING THE CLEANER
• Lift the cleaner only by the carrying handle.
• Do not sit it upright as it will fall over.
• The vacuum cleaner should follow you as you vacuum. If you feel resistance, check the
vacuum or power cord is not tangled or caught. Pulling the vacuum under stress by the
hose will cause the hose to stretch and can damage the hose connection and power
cord.
EXTENDABLE TUBE
• Fit the extendable tube to the nozzle on the flexible hose.
a) Push the tube release in the direction of the arrows on the release button and keep it
pressed.
b) Pull out as much of the inner tube as you need and then release the button; it is best
to retract the tube for storage.
• Push the narrow end of the extendable tube on to the nozzle. Choose a tool and push it
onto the wide end of the tube.
CHOOSE THE TOOL FOR THE JOB
• The combination floor tool, mini pet turbo floor tool, turbo floor tool and crevice tool will fit
on the nozzle or on the end of the extendable tube. The extendable tube fits on the end of
the nozzle.
