Russell Hobbs RHEDB6002, Руководство пользователя, Страница: 6 / 20

SECURING YOUR ELECTRIC BLANKET
Note:
•
Use only as an under blanket and do not use above the occupant of the bed.
•
This product can be used with any type of bedding including waterproof bed
protectors.
•
Tie this blanket securely to the bed.
•
Ensure the blanket is not folded, rucked or creased. When in use, do not cover
with pillows.
•
Place the blanket on directly the mattress, leaving room for the pillow and with the
mains lead at the pillow end (you must ensure the control switch end is at the
head of the bed, with the connector facing upwards).
•
To accommodate for left and right hand use, it is safe to reverse the blanket.
•
Remove tags from tie tapes.
•
Pass the middle tie tape under the middle of the mattress and through the middle
loop on the opposite side. Tie tightly (fig 1)
•
Pass end tape under the corresponding bottom corner of the mattress and through
the end loop, down under the other bottom corner of the mattress and through
the bottom side loop (fig 2). Tie tape firmly.
•
Repeat procedure for the tape at the top end.
•
The blanket should now be firmly taped to mattress (fig 3).
Page 6
Fig 1
Fig 3
Fig 2