Russell Hobbs RHEDB6002, Руководство пользователя, Страница: 5 / 20

SAFETY INSTRUCTIONS
•
Do not switch the power on if the blanket is wet or in a folded state.
•
Do not dry-clean this blanket. Cleaning liquids may have a deleterious effect on the
insulation or covering of the heating unit. It is recommended you follow
instructions for localized soiling or hand washing if soiling occurs.
•
If any abnormality or defect in operation of this blanket is observed, discontinue its
use immediately and consult the manufacturer or a licensed electrician.
•
Regularly inspect the supply cord, plug, controller and blanket for any damage. If
found damaged in any way, immediately cease use of the blanket and return to
store or authorized service agent for inspection.
•
Avoid pressing creases into the appliance.
•
Clean this blanket only as per instruction supplied with this blanket.
•
The appliance is only to be used with the type of control unit marked on the
appliance.
•
Avoid creasing the appliance by placing items on top of it during storage.
•
When storing the appliance allow it to cool down before folding.
•
When storing, fold neatly but not tightly (or roll) in the original packaging without
sharp bends in the heating element and store where no other objects will be
placed upon it.
•
There are no customer serviceable parts inside, Have the blanket serviced by a
qualified service agent should the unit require access to internal components.
Electrical Safety
THIS APPLIANCE MUST BE PLUGGED INTO AN EARTHED SOCKET
•
Before switching on, make sure that the voltage of your electricity supply is the
same as that indicated on the rating plate. This product is designed to operate on
220
– 240V AC; 50Hz. Connection to any other power source may damage the unit.
•
This product may be fitted with a non re-wireable plug. If it is necessary to change
the fuse in the plug, the fuse cover must be refitted. If the fuse cover becomes lost
or damaged, the plug must not be used until a suitable replacement is obtained.
•
If the plug has to be changed because it is not suitable for your socket, or becomes
damaged in any way, it should be cut off and an appropriate plug fitted. This should
be carried out by a qualified electrician. The plug removed must be disposed of
safely, as insertion into a 13 Amp socket is likely to cause an electrical hazard.
Page 5