TROUBLE-SHOOTING
Problem
Possible Reasons
Solution
No steam is being produced
or leakage.
The ttemperature dial has been
set to
“
”
Set the temperature dial
to the required positioin.
Iron does not heat up
Power plug is not plugged in
properly to the main power
supply outlet
Plug the power plug firmly
into
the
main
power
supply outlet
The required steam setting is not
selected
Set the steam level light
to
“
”
. Then press
the steam setting button
to select the required
steam setting
Leaking
water
from
soleplate.
There is still not enough heat
being produced.
Use the steam button only
after the indicator light
has turned off.
The water is over the max
position.
Pour out the remaining
water.
Little Steam
A steam hole is blocked.
Clean the steam hole with
distilled water.
Too little water in the water tank.
Fill water into the tank as
per earlier instructions.
