Russell Hobbs RHCC5001, Руководство пользователя

Страница: 10 / 20

10
Start to use your Carpet Washer
1. Plug the cord into the electrical socket. Turn on the machine by
using the on/off switch located on the side of the machine.
IMPORTANT: Never leave unit unattended with power on. Turn off
when emptying and filling tanks.
2. Step on the handle release pedal to lower the machine into the
cleaning position [Fig. 4]. While pressing the trigger, pull the carpet
washer in a backward motion. Release the trigger and push the unit
forward in the same path to agitate and remove dirty water and
solution from the carpet. (For heavily soiled areas, repeat if
necessary).
IMPORTANT: For best cleaning results use a steady, moderate,
forward and backward motion. Always work from back to front
across the room to avoid stepping on wet carpet and lowering the
pile.
USING YOUR CARPET WASHER
Fig. 4