7
•
The body of the heater should be cleaned with a damp cloth. Do not let water
enter the heater.
•
Do not use bleach or other abrasive substance or solvents to clean your heater
as it can be damaging to the finish.
•
Do not immerse the heater in water or any other liquid, or hold it under a running
tap to clean.
•
To remove stubborn spots/marks, wipe the surfaces with a cloth slightly
dampened in soapy water or mild non-abrasive cleaner. Rinse and dry a clean,
dry, soft cloth.
STORING THE HEATER
•
Unplug the unit from the wall outlet and clean all the parts as instructed above.
Ensure that all parts are dry before storing.
•
Store the heater in its box or in a clean, dry place.
•
Never store the heater while it is still wet or dirty.
•
Never wrap the power cord around the heater.
SERVICING THE HEATER
There are no user serviceable parts in this heater. If the unit is not operating correctly,
please check the following:
•
You have followed the instructions correctly
•
That the unit has been wired correctly and that the wall socket is switched on.
•
That the mains power supply is ON.
•
That the plug is firmly in the mains socket.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised
service agent, in order to avoid any hazard. If service becomes necessary within the
warranty period, the heater should be returned to an approved Amalgamated Appliances
(Pty) Ltd service centre. Servicing outside the warranty period is still available, but will,
however, be chargeable.
