Once the timer has been set, the timer will count down the hours in 1 hour and the LCD
will display the remaining operating time, until the heater will switch off.
THERMOSTAT INSTRUCTION
1. Pressing the POWER/MODE
button until the display shows AUTO mode.
2. To adjust set temperature, Rotate the Thermostat knob up to increase the desired
temperature and down
to decrease the desired temperature.
3. When the air temperature raises 2 degrees above the set temperature, the heater
will stop heating at once.
4. When the air temperature drops 2 degrees below the set temperature, the unit will
come back on.
REMOTE CONTROL
1) Press the POWER button and the heater will turn on.
2) Press the OSC to start and stop the oscillation function.
3) Press the TIMER allowing you to program up to 8 hours
4) Press the TEMP. buttons (+,-) to increase or decrease
temperature.
5)The remote control is powered by two AAA batteries.
There is a cover on the back of the remote control that
can be removed for replacement of the batteries as
required.
PLEASE NOTE : BATTERIES NOT INCLUDED
CLEANING AND MAINTENANCE
•
This heater is for household use only and is not user-serviceable.
•
Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
•
Always remember to unplug the unit from the electrical outlet when not in use
and before cleaning. Ensure that the heat control is set to Off. Ensure the heater
has cooled down.
6
