Russell Hobbs RHBU60FREEZER-N Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 32

Russell Hobbs RHBU60FREEZER-N Скачать руководство пользователя страница 10

Depending on the ambient temperature of the room the appliance is situated in,
you may need to adjust the temperature control dial; in a room with a high
ambient temperature the temperature control dial may need to be adjusted to a
colder setting (moved towards setting 5) or in a room with a low ambient
temperature the temperature control dial may need to be adjusted to a warmer
setting (moved towards setting 3).

Once the temperature control has been set, close the door and plug in the
appliance. We recommend that the door is not opened for a minimum of 4
hours to allow the appliance to reach the standard operating temperature.

Note: The standard operating temperature for the freezer compartment should
be between -18

°

C and -25

°

C.

Note: The temperature of the freshly stored food and how often the door is
opened affects the temperature in the refrigerator compartment. If
required, change the temperature setting.

10

Allow to stand for a minimum of 3 hours before plugging in to the mains

Usage

«
...
8
9
10
11
12
...
»

Содержание RHBU60FREEZER-N

































Отзывы:

Нет отзывов