7
TIPS
• Generally, large quantities, thick mixes, and a high ratio of solids to liquids require
longer blending times and slower speeds.
• Smaller quantities, thinner mixes, and more liquids than solids require shorter blending
times and higher speeds and intermittent pulses.
• When blending small quantities, always add enough ingredients to ensure that the
blender blades are covered before operating your blender.
• To add ingredients while the blender is working, remove the cap, pour the new
ingredients through the hole, then replace the cap.
• Check that the added ingredients don’t increase the volume in the jug past the 1500ml mark.
ERROR SIGNALS
Error 1:
The control panel flashes in a repeating sequence of three quick flashes then a longer
flash. This indicates that a large air bubble has formed in a mixture that may be too dry. Touch
anywhere on the control panel to dismiss the error and then add liquid and/or switch off, stir
the ingredients and restart.
Error 2:
The control panel flashes on and off constantly. This indicates that the motor has
overheated. Unplug and let the blender cool down for 20 minutes to reset.
CARE AND MAINTENANCE
1.
When you have finished, tap then unplug the blender.
2.
Wipe the outside of the motor unit with a clean damp cloth.
3.
Hand wash the removable parts.
Referring to the diagram:
You may wash these parts in the top rack of a dishwasher.
You may wash these parts in the dishwasher.
If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface
finishes. The damage should be cosmetic only, and should not affect the operation of the
appliance.
BLADE UNIT
To remove the blade unit for cleaning.
1. Remove the lid.
2. Sit the jug upside down.
3. Unscrew and remove the collar from the jug.
4. Grasp the blade unit and lift it out of the jug.
- the seal is part of the blade unit and is not removable.
- to avoid injury, take care when handling the blades.
5. Wash the blade unit in warm soapy water, rinse, and air dry.
6. Refit the blade unit to the bottom of the jug.
7. Replace the collar and screw firmly onto the bottom of the jug.
Legislation in some localities mandates that e-waste (anything with a plug, battery or cord)
is disposed of through controlled recycling facilities and must not be disposed of in general
household waste. For more information about recycling of electrical and battery operated
appliances, please contact your local council or your local household waste disposal service.
