6
• When you have finished, tap then unplug the blender. Always wait till the blade unit comes
to a stop before removing the lid from the jug, or removing the jug from the motor unit.
PULSE OPERATION
For control over blending consistency, use the pulse/ice crush icon.
1.
Tap to activate the control panel.
2.
Tap the icon to enter pulse/ice crush mode. The icon will flash.
3.
Tap the icon again and keep your finger on it. The blender will run at maximum speed
for as long as you keep your finger in contact with the icon. Release your finger to stop.
ICE CRUSH
Tip: Add a little water to the ice cubes.
1.
Place the ice cubes into the jug and fit the lid. Don’t add too many ice cubes or you may
overload your blender. Add a little water to help the crushing process.
2.
Tap to activate the control panel.
3.
Tap the icon to enter pulse/ice crush mode. The icon will flash.
4.
Tap the icon again and keep your finger on it. The blender will run at maximum speed
for as long as you keep your finger in contact with the icon. Release your finger to stop.
WHEN YOU HAVE FINISHED
• Switch off ( ), and wait till the blade unit comes to a stop before removing the lid from the
jug, or removing the jug from the motor unit.
USING THE ADAPTIVE BLENDING PROGRAMMES
1.
Tap to activate the control panel.
2.
Tap the desired function icon then tap the flashing icon.
3.
Your blender will first sense the level of resistance of the ingredients for about 3 seconds
and then adapt the programme accordingly.
Button
Function
Smoothie - blend fresh or frozen fruits and other ingredients into thick
smoothies
Icy drink - liquefy frozen drinks.
Soup - Use for preparing soup ingredients. Hot liquids/ingredients should
never be placed in the blending jug
NOTES
• The Smoothie, Icy drink and Soup programmes will run then stop automatically. The lights
on the slider control act as a guide to show the progress of the blending cycle. Once all of
the lights have gone out, the programme will stop.
• The Sensigence blender is programmed to adapt to the level of resistance of the ingredients
within the jug, therefore throughout the blending cycle the speed of the motor may change.
It may stop briefly whilst the programme is still running and blending times will differ
depending on the ingredients inside. These adaptions help achieve optimal results.
• To stop a programme at any time, tap .
• When you have finished, tap then unplug the blender. Always wait till the blade unit comes
to a stop before removing the lid from the jug, or removing the jug from the motor unit.
4
BEFORE USING FOR THE FIRST TIME
Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.
PREPARATION
1. Sit the motor unit on a stable, level surface.
2. Lower the jug on to the motor unit. You cannot operate your blender unless the jug is
correctly placed onto the motor unit. This is a safety feature.
3. Remove the lid.
4. Put the ingredients into the jug. Don’t fill past the 1500 ml mark. If you do, the contents may
force the lid off when you start the motor.
5. Replace the lid. Don’t operate the appliance without fitting the lid.
6. Put the plug into the power socket.
CONTROLS
When you connect your blender to the mains supply, the control panel will show the
C
symbol
to indicate that it is in standby mode. Tap
C
to activate the control panel. The control panel is a
touch screen. After 30 seconds of inactivity, your blender will revert back to the standby state.
The folowing table lists the controls and gives a brief overview of their function.
Button
Function
C
Standby. Tap to switch your blender in or out of standby mode.
@
Stop. Tap to stop blending, or to stop the currently active program.
+
Start. Tap to start blending, or to start the selected program.
Slider control. Swipe left or right to select or modify the speed. Tapping the
slider control along its length will move the speed control to the point where
you tap.
+
Highest speed. Tap to set the speed control to its maximum setting.
–
Lowest speed. Tap to set the speed control to its minimum setting.
*
Ice crush/Pulse - for crushing ice or fine blending control.
%
Smoothie - blend frozen fruits and other ingredients into thick smoothies.
^
Icy drink - liquefy frozen drinks.
&
Soup - use for making soups.
MANUAL OPERATION
You can start, stop, pulse and choose the speed of your blender manually to suit the ingredients
you are processing.
1. Tap
C
to activate the control panel.
2. Swipe or tap the slider control to the desired speed.
3. Tap the flashing
+
icon to start your blender. Your blender will start at the selected speed.
•
To stop blending, tap
@
at any time.
4
BEFORE USING FOR THE FIRST TIME
Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.
PREPARATION
1. Sit the motor unit on a stable, level surface.
2. Lower the jug on to the motor unit. You cannot operate your blender unless the jug is
correctly placed onto the motor unit. This is a safety feature.
3. Remove the lid.
4. Put the ingredients into the jug. Don’t fill past the 1500 ml mark. If you do, the contents may
force the lid off when you start the motor.
5. Replace the lid. Don’t operate the appliance without fitting the lid.
6. Put the plug into the power socket.
CONTROLS
When you connect your blender to the mains supply, the control panel will show the
C
symbol
to indicate that it is in standby mode. Tap
C
to activate the control panel. The control panel is a
touch screen. After 30 seconds of inactivity, your blender will revert back to the standby state.
The folowing table lists the controls and gives a brief overview of their function.
Button
Function
C
Standby. Tap to switch your blender in or out of standby mode.
@
Stop. Tap to stop blending, or to stop the currently active program.
+
Start. Tap to start blending, or to start the selected program.
Slider control. Swipe left or right to select or modify the speed. Tapping the
slider control along its length will move the speed control to the point where
you tap.
+
Highest speed. Tap to set the speed control to its maximum setting.
–
Lowest speed. Tap to set the speed control to its minimum setting.
*
Ice crush/Pulse - for crushing ice or fine blending control.
%
Smoothie - blend frozen fruits and other ingredients into thick smoothies.
^
Icy drink - liquefy frozen drinks.
&
Soup - use for making soups.
MANUAL OPERATION
You can start, stop, pulse and choose the speed of your blender manually to suit the ingredients
you are processing.
1. Tap
C
to activate the control panel.
2. Swipe or tap the slider control to the desired speed.
3. Tap the flashing
+
icon to start your blender. Your blender will start at the selected speed.
•
To stop blending, tap
@
at any time.
4
BEFORE USING FOR THE FIRST TIME
Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.
PREPARATION
1. Sit the motor unit on a stable, level surface.
2. Lower the jug on to the motor unit. You cannot operate your blender unless the jug is
correctly placed onto the motor unit. This is a safety feature.
3. Remove the lid.
4. Put the ingredients into the jug. Don’t fill past the 1500 ml mark. If you do, the contents may
force the lid off when you start the motor.
5. Replace the lid. Don’t operate the appliance without fitting the lid.
6. Put the plug into the power socket.
CONTROLS
When you connect your blender to the mains supply, the control panel will show the
C
symbol
to indicate that it is in standby mode. Tap
C
to activate the control panel. The control panel is a
touch screen. After 30 seconds of inactivity, your blender will revert back to the standby state.
The folowing table lists the controls and gives a brief overview of their function.
Button
Function
C
Standby. Tap to switch your blender in or out of standby mode.
@
Stop. Tap to stop blending, or to stop the currently active program.
+
Start. Tap to start blending, or to start the selected program.
Slider control. Swipe left or right to select or modify the speed. Tapping the
slider control along its length will move the speed control to the point where
you tap.
+
Highest speed. Tap to set the speed control to its maximum setting.
–
Lowest speed. Tap to set the speed control to its minimum setting.
*
Ice crush/Pulse - for crushing ice or fine blending control.
%
Smoothie - blend frozen fruits and other ingredients into thick smoothies.
^
Icy drink - liquefy frozen drinks.
&
Soup - use for making soups.
MANUAL OPERATION
You can start, stop, pulse and choose the speed of your blender manually to suit the ingredients
you are processing.
1. Tap
C
to activate the control panel.
2. Swipe or tap the slider control to the desired speed.
3. Tap the flashing
+
icon to start your blender. Your blender will start at the selected speed.
•
To stop blending, tap
@
at any time.
4
BEFORE USING FOR THE FIRST TIME
Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.
PREPARATION
1. Sit the motor unit on a stable, level surface.
2. Lower the jug on to the motor unit. You cannot operate your blender unless the jug is
correctly placed onto the motor unit. This is a safety feature.
3. Remove the lid.
4. Put the ingredients into the jug. Don’t fill past the 1500 ml mark. If you do, the contents may
force the lid off when you start the motor.
5. Replace the lid. Don’t operate the appliance without fitting the lid.
6. Put the plug into the power socket.
CONTROLS
When you connect your blender to the mains supply, the control panel will show the
C
symbol
to indicate that it is in standby mode. Tap
C
to activate the control panel. The control panel is a
touch screen. After 30 seconds of inactivity, your blender will revert back to the standby state.
The folowing table lists the controls and gives a brief overview of their function.
Button
Function
C
Standby. Tap to switch your blender in or out of standby mode.
@
Stop. Tap to stop blending, or to stop the currently active program.
+
Start. Tap to start blending, or to start the selected program.
Slider control. Swipe left or right to select or modify the speed. Tapping the
slider control along its length will move the speed control to the point where
you tap.
+
Highest speed. Tap to set the speed control to its maximum setting.
–
Lowest speed. Tap to set the speed control to its minimum setting.
*
Ice crush/Pulse - for crushing ice or fine blending control.
%
Smoothie - blend frozen fruits and other ingredients into thick smoothies.
^
Icy drink - liquefy frozen drinks.
&
Soup - use for making soups.
MANUAL OPERATION
You can start, stop, pulse and choose the speed of your blender manually to suit the ingredients
you are processing.
1. Tap
C
to activate the control panel.
2. Swipe or tap the slider control to the desired speed.
3. Tap the flashing
+
icon to start your blender. Your blender will start at the selected speed.
•
To stop blending, tap
@
at any time.
4
BEFORE USING FOR THE FIRST TIME
Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.
PREPARATION
1. Sit the motor unit on a stable, level surface.
2. Lower the jug on to the motor unit. You cannot operate your blender unless the jug is
correctly placed onto the motor unit. This is a safety feature.
3. Remove the lid.
4. Put the ingredients into the jug. Don’t fill past the 1500 ml mark. If you do, the contents may
force the lid off when you start the motor.
5. Replace the lid. Don’t operate the appliance without fitting the lid.
6. Put the plug into the power socket.
CONTROLS
When you connect your blender to the mains supply, the control panel will show the
C
symbol
to indicate that it is in standby mode. Tap
C
to activate the control panel. The control panel is a
touch screen. After 30 seconds of inactivity, your blender will revert back to the standby state.
The folowing table lists the controls and gives a brief overview of their function.
Button
Function
C
Standby. Tap to switch your blender in or out of standby mode.
@
Stop. Tap to stop blending, or to stop the currently active program.
+
Start. Tap to start blending, or to start the selected program.
Slider control. Swipe left or right to select or modify the speed. Tapping the
slider control along its length will move the speed control to the point where
you tap.
+
Highest speed. Tap to set the speed control to its maximum setting.
–
Lowest speed. Tap to set the speed control to its minimum setting.
*
Ice crush/Pulse - for crushing ice or fine blending control.
%
Smoothie - blend frozen fruits and other ingredients into thick smoothies.
^
Icy drink - liquefy frozen drinks.
&
Soup - use for making soups.
MANUAL OPERATION
You can start, stop, pulse and choose the speed of your blender manually to suit the ingredients
you are processing.
1. Tap
C
to activate the control panel.
2. Swipe or tap the slider control to the desired speed.
3. Tap the flashing
+
icon to start your blender. Your blender will start at the selected speed.
•
To stop blending, tap
@
at any time.
4
BEFORE USING FOR THE FIRST TIME
Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.
PREPARATION
1. Sit the motor unit on a stable, level surface.
2. Lower the jug on to the motor unit. You cannot operate your blender unless the jug is
correctly placed onto the motor unit. This is a safety feature.
3. Remove the lid.
4. Put the ingredients into the jug. Don’t fill past the 1500 ml mark. If you do, the contents may
force the lid off when you start the motor.
5. Replace the lid. Don’t operate the appliance without fitting the lid.
6. Put the plug into the power socket.
CONTROLS
When you connect your blender to the mains supply, the control panel will show the
C
symbol
to indicate that it is in standby mode. Tap
C
to activate the control panel. The control panel is a
touch screen. After 30 seconds of inactivity, your blender will revert back to the standby state.
The folowing table lists the controls and gives a brief overview of their function.
Button
Function
C
Standby. Tap to switch your blender in or out of standby mode.
@
Stop. Tap to stop blending, or to stop the currently active program.
+
Start. Tap to start blending, or to start the selected program.
Slider control. Swipe left or right to select or modify the speed. Tapping the
slider control along its length will move the speed control to the point where
you tap.
+
Highest speed. Tap to set the speed control to its maximum setting.
–
Lowest speed. Tap to set the speed control to its minimum setting.
*
Ice crush/Pulse - for crushing ice or fine blending control.
%
Smoothie - blend frozen fruits and other ingredients into thick smoothies.
^
Icy drink - liquefy frozen drinks.
&
Soup - use for making soups.
MANUAL OPERATION
You can start, stop, pulse and choose the speed of your blender manually to suit the ingredients
you are processing.
1. Tap
C
to activate the control panel.
2. Swipe or tap the slider control to the desired speed.
3. Tap the flashing
+
icon to start your blender. Your blender will start at the selected speed.
•
To stop blending, tap
@
at any time.
4
BEFORE USING FOR THE FIRST TIME
Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.
PREPARATION
1. Sit the motor unit on a stable, level surface.
2. Lower the jug on to the motor unit. You cannot operate your blender unless the jug is
correctly placed onto the motor unit. This is a safety feature.
3. Remove the lid.
4. Put the ingredients into the jug. Don’t fill past the 1500 ml mark. If you do, the contents may
force the lid off when you start the motor.
5. Replace the lid. Don’t operate the appliance without fitting the lid.
6. Put the plug into the power socket.
CONTROLS
When you connect your blender to the mains supply, the control panel will show the
C
symbol
to indicate that it is in standby mode. Tap
C
to activate the control panel. The control panel is a
touch screen. After 30 seconds of inactivity, your blender will revert back to the standby state.
The folowing table lists the controls and gives a brief overview of their function.
Button
Function
C
Standby. Tap to switch your blender in or out of standby mode.
@
Stop. Tap to stop blending, or to stop the currently active program.
+
Start. Tap to start blending, or to start the selected program.
Slider control. Swipe left or right to select or modify the speed. Tapping the
slider control along its length will move the speed control to the point where
you tap.
+
Highest speed. Tap to set the speed control to its maximum setting.
–
Lowest speed. Tap to set the speed control to its minimum setting.
*
Ice crush/Pulse - for crushing ice or fine blending control.
%
Smoothie - blend frozen fruits and other ingredients into thick smoothies.
^
Icy drink - liquefy frozen drinks.
&
Soup - use for making soups.
MANUAL OPERATION
You can start, stop, pulse and choose the speed of your blender manually to suit the ingredients
you are processing.
1. Tap
C
to activate the control panel.
2. Swipe or tap the slider control to the desired speed.
3. Tap the flashing
+
icon to start your blender. Your blender will start at the selected speed.
•
To stop blending, tap
@
at any time.
4
BEFORE USING FOR THE FIRST TIME
Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.
PREPARATION
1. Sit the motor unit on a stable, level surface.
2. Lower the jug on to the motor unit. You cannot operate your blender unless the jug is
correctly placed onto the motor unit. This is a safety feature.
3. Remove the lid.
4. Put the ingredients into the jug. Don’t fill past the 1500 ml mark. If you do, the contents may
force the lid off when you start the motor.
5. Replace the lid. Don’t operate the appliance without fitting the lid.
6. Put the plug into the power socket.
CONTROLS
When you connect your blender to the mains supply, the control panel will show the
C
symbol
to indicate that it is in standby mode. Tap
C
to activate the control panel. The control panel is a
touch screen. After 30 seconds of inactivity, your blender will revert back to the standby state.
The folowing table lists the controls and gives a brief overview of their function.
Button
Function
C
Standby. Tap to switch your blender in or out of standby mode.
@
Stop. Tap to stop blending, or to stop the currently active program.
+
Start. Tap to start blending, or to start the selected program.
Slider control. Swipe left or right to select or modify the speed. Tapping the
slider control along its length will move the speed control to the point where
you tap.
+
Highest speed. Tap to set the speed control to its maximum setting.
–
Lowest speed. Tap to set the speed control to its minimum setting.
*
Ice crush/Pulse - for crushing ice or fine blending control.
%
Smoothie - blend frozen fruits and other ingredients into thick smoothies.
^
Icy drink - liquefy frozen drinks.
&
Soup - use for making soups.
MANUAL OPERATION
You can start, stop, pulse and choose the speed of your blender manually to suit the ingredients
you are processing.
1. Tap
C
to activate the control panel.
2. Swipe or tap the slider control to the desired speed.
3. Tap the flashing
+
icon to start your blender. Your blender will start at the selected speed.
•
To stop blending, tap
@
at any time.
4
BEFORE USING FOR THE FIRST TIME
Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.
PREPARATION
1. Sit the motor unit on a stable, level surface.
2. Lower the jug on to the motor unit. You cannot operate your blender unless the jug is
correctly placed onto the motor unit. This is a safety feature.
3. Remove the lid.
4. Put the ingredients into the jug. Don’t fill past the 1500 ml mark. If you do, the contents may
force the lid off when you start the motor.
5. Replace the lid. Don’t operate the appliance without fitting the lid.
6. Put the plug into the power socket.
CONTROLS
When you connect your blender to the mains supply, the control panel will show the
C
symbol
to indicate that it is in standby mode. Tap
C
to activate the control panel. The control panel is a
touch screen. After 30 seconds of inactivity, your blender will revert back to the standby state.
The folowing table lists the controls and gives a brief overview of their function.
Button
Function
C
Standby. Tap to switch your blender in or out of standby mode.
@
Stop. Tap to stop blending, or to stop the currently active program.
+
Start. Tap to start blending, or to start the selected program.
Slider control. Swipe left or right to select or modify the speed. Tapping the
slider control along its length will move the speed control to the point where
you tap.
+
Highest speed. Tap to set the speed control to its maximum setting.
–
Lowest speed. Tap to set the speed control to its minimum setting.
*
Ice crush/Pulse - for crushing ice or fine blending control.
%
Smoothie - blend frozen fruits and other ingredients into thick smoothies.
^
Icy drink - liquefy frozen drinks.
&
Soup - use for making soups.
MANUAL OPERATION
You can start, stop, pulse and choose the speed of your blender manually to suit the ingredients
you are processing.
1. Tap
C
to activate the control panel.
2. Swipe or tap the slider control to the desired speed.
3. Tap the flashing
+
icon to start your blender. Your blender will start at the selected speed.
•
To stop blending, tap
@
at any time.
4
BEFORE USING FOR THE FIRST TIME
Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.
PREPARATION
1. Sit the motor unit on a stable, level surface.
2. Lower the jug on to the motor unit. You cannot operate your blender unless the jug is
correctly placed onto the motor unit. This is a safety feature.
3. Remove the lid.
4. Put the ingredients into the jug. Don’t fill past the 1500 ml mark. If you do, the contents may
force the lid off when you start the motor.
5. Replace the lid. Don’t operate the appliance without fitting the lid.
6. Put the plug into the power socket.
CONTROLS
When you connect your blender to the mains supply, the control panel will show the
C
symbol
to indicate that it is in standby mode. Tap
C
to activate the control panel. The control panel is a
touch screen. After 30 seconds of inactivity, your blender will revert back to the standby state.
The folowing table lists the controls and gives a brief overview of their function.
Button
Function
C
Standby. Tap to switch your blender in or out of standby mode.
@
Stop. Tap to stop blending, or to stop the currently active program.
+
Start. Tap to start blending, or to start the selected program.
Slider control. Swipe left or right to select or modify the speed. Tapping the
slider control along its length will move the speed control to the point where
you tap.
+
Highest speed. Tap to set the speed control to its maximum setting.
–
Lowest speed. Tap to set the speed control to its minimum setting.
*
Ice crush/Pulse - for crushing ice or fine blending control.
%
Smoothie - blend frozen fruits and other ingredients into thick smoothies.
^
Icy drink - liquefy frozen drinks.
&
Soup - use for making soups.
MANUAL OPERATION
You can start, stop, pulse and choose the speed of your blender manually to suit the ingredients
you are processing.
1. Tap
C
to activate the control panel.
2. Swipe or tap the slider control to the desired speed.
3. Tap the flashing
+
icon to start your blender. Your blender will start at the selected speed.
•
To stop blending, tap
@
at any time.
4
BEFORE USING FOR THE FIRST TIME
Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.
PREPARATION
1. Sit the motor unit on a stable, level surface.
2. Lower the jug on to the motor unit. You cannot operate your blender unless the jug is
correctly placed onto the motor unit. This is a safety feature.
3. Remove the lid.
4. Put the ingredients into the jug. Don’t fill past the 1500 ml mark. If you do, the contents may
force the lid off when you start the motor.
5. Replace the lid. Don’t operate the appliance without fitting the lid.
6. Put the plug into the power socket.
CONTROLS
When you connect your blender to the mains supply, the control panel will show the
C
symbol
to indicate that it is in standby mode. Tap
C
to activate the control panel. The control panel is a
touch screen. After 30 seconds of inactivity, your blender will revert back to the standby state.
The folowing table lists the controls and gives a brief overview of their function.
Button
Function
C
Standby. Tap to switch your blender in or out of standby mode.
@
Stop. Tap to stop blending, or to stop the currently active program.
+
Start. Tap to start blending, or to start the selected program.
Slider control. Swipe left or right to select or modify the speed. Tapping the
slider control along its length will move the speed control to the point where
you tap.
+
Highest speed. Tap to set the speed control to its maximum setting.
–
Lowest speed. Tap to set the speed control to its minimum setting.
*
Ice crush/Pulse - for crushing ice or fine blending control.
%
Smoothie - blend frozen fruits and other ingredients into thick smoothies.
^
Icy drink - liquefy frozen drinks.
&
Soup - use for making soups.
MANUAL OPERATION
You can start, stop, pulse and choose the speed of your blender manually to suit the ingredients
you are processing.
1. Tap
C
to activate the control panel.
2. Swipe or tap the slider control to the desired speed.
3. Tap the flashing
+
icon to start your blender. Your blender will start at the selected speed.
•
To stop blending, tap
@
at any time.
4
BEFORE USING FOR THE FIRST TIME
Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.
PREPARATION
1. Sit the motor unit on a stable, level surface.
2. Lower the jug on to the motor unit. You cannot operate your blender unless the jug is
correctly placed onto the motor unit. This is a safety feature.
3. Remove the lid.
4. Put the ingredients into the jug. Don’t fill past the 1500 ml mark. If you do, the contents may
force the lid off when you start the motor.
5. Replace the lid. Don’t operate the appliance without fitting the lid.
6. Put the plug into the power socket.
CONTROLS
When you connect your blender to the mains supply, the control panel will show the
C
symbol
to indicate that it is in standby mode. Tap
C
to activate the control panel. The control panel is a
touch screen. After 30 seconds of inactivity, your blender will revert back to the standby state.
The folowing table lists the controls and gives a brief overview of their function.
Button
Function
C
Standby. Tap to switch your blender in or out of standby mode.
@
Stop. Tap to stop blending, or to stop the currently active program.
+
Start. Tap to start blending, or to start the selected program.
Slider control. Swipe left or right to select or modify the speed. Tapping the
slider control along its length will move the speed control to the point where
you tap.
+
Highest speed. Tap to set the speed control to its maximum setting.
–
Lowest speed. Tap to set the speed control to its minimum setting.
*
Ice crush/Pulse - for crushing ice or fine blending control.
%
Smoothie - blend frozen fruits and other ingredients into thick smoothies.
^
Icy drink - liquefy frozen drinks.
&
Soup - use for making soups.
MANUAL OPERATION
You can start, stop, pulse and choose the speed of your blender manually to suit the ingredients
you are processing.
1. Tap
C
to activate the control panel.
2. Swipe or tap the slider control to the desired speed.
3. Tap the flashing
+
icon to start your blender. Your blender will start at the selected speed.
•
To stop blending, tap
@
at any time.
