Russell Hobbs RHBI714WM1, Инструкция по эксплуатации

Страница: 32 / 56

Additional Functions
Key lock
The key lock function allows you to lock the buttons so that the wash cycle
you have chosen cannot be changed unintentionally. To activate key lock,
press and hold the temperature and spin speed button simultaneously for
at least 3 seconds. The key lock icon will flash on the display when the
keylock is activated.
If any button is pressed or selected programme is changed by the
programme dial while the key lock is active, the key lock icon will flash on
the display.
To deactivate the key lock, press and hold the temperature and spin speed
button simultaneously for at least 3 seconds until the key lock icon on the
display disappears.
Start/Pause
To start the selected programme, press the Start/Pause button. When
Start/Pause is pressed on the machine with the door closed, the door lock
indicator will flash momentarily and then illuminate.
Note:
•
If the door is not properly closed, the light will continue to flash for
about 7 seconds, after which the start command will be automatically
cancelled. In this case, close the door in the proper way and press the
Start/Pause button.
•
A special safety device prevents the door from being opened
immediately after the end of the cycle. Wait for 2 minutes after the
wash cycle has finished and the DOOR LOCKED light has gone out
before opening the door. At the end of the cycle turn the programme
selector to OFF.
32