ioniser
Your air purifier is equipped with an ioniser that emits millions of negative ions
into the atmosphere. Negative ions help to reduce stress and fatigue and increase
alertness and general well being.
To turn on the ioniser mode press the button until
‘Refresh’
flashes on the LCD.
Then press the button to turn the function on - the icon will be displayed.
Once the icon stops flashing and it remains constant then you know the mode is selected.
You can also activate this function by pressing the
REFRESH
button on the remote control.
To turn the feature off simply press the
REFRESH
button on the remote control or re-
select the and press until the icon disappears.
using the on/off timer
Your air purifier is equipped with a digital on/off timer so that you can set the unit to
come on and off to your requirement.
Before setting this function you should have set the clock already. If not please follow
the section above telling you how to set the clock.
Once the clock is set you have options to control program timing. You can elect for the
timer to be set to come on at a determined time and remain on, or you can elect to
program a time for it to switch off. Also, if the unit is already running you can program
a time for it to switch off.
To program the unit to switch on the unit it must first be in standby.
Press either the or buttons once. You will notice the hours part of the time
starts flashing and the words
timer on
appear. Use the and buttons to
select the hour and press . The minutes part of the time will start flashing and
again use the and buttons to select the minutes. Press to confirm. At
this point you will notice the appear to confirm the program is set.
As soon as the appears you will notice that the hour part of the time starts flashing
and the words
timer off
appear. If you want to program the unit to switch off at a
certain time then you should press the and buttons to select the hour, then
press and again and buttons to confirm the minutes and then to
confirm the times.
If you want to leave the unit running after switching on then you don’t have to pro-
gram an off time.
When the words
timer off
appear simply leave the display flashing and don’t press any
buttons. After 4 seconds the display will stop flashing and revert to the current time.
This means the on time only has been set.
When setting the timer to switch the unit on, it will turn on in Auto mode.
If the unit is currently running you can decide to program an exact time to turn the
unit off and put into standby. To do this press the or button once and the
hour part of the time will start flashing and the words
timer off
will appear. Use
the and buttons to select the hour and then and the and
buttons to program the minutes. Then press to confirm. You will notice the
appears and the display reverts to the current time. The machine will keep operating
until your programmed time arrives, then it will switch off and into standby.
11
MODE
SET
SET
TIMER +
TIMER -
SET
TIMER +
TIMER -
SET
TIMER +
TIMER -
TIMER +
TIMER -
SET
TIMER +
TIMER -
SET
TIMER +
TIMER -
TIMER +
TIMER -
SET
TIMER +
TIMER -
SET
ountain
BREEZE
C L E A N A I R
