Russell Hobbs 24601-56, Инструкция по эксплуатации

Страница: 3 / 48

3
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging
before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
supervised/instructed and understand the hazards involved.
Children must not use or play with the appliance.
Keep the appliance and cable out of reach of children.
c
Misuse of the appliance may cause injury.
Unplug the appliance before assembly, disassembly, or cleaning.
Don’t leave the appliance unattended while plugged in.
If the cable is damaged, it must be replaced by the manufacturer, its
service agent, or someone similarly qualified, in order to avoid hazard.
b
Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
• Don’t use the wand in hot oil – even moderately hot oil can cause a nasty burn.
• Don’t try to chip ice, don’t try to chop raw meat, and take great care with the blades.
• Don’t fit an attachment or accessory other than those we supply.
• Don’t use the appliance for any purpose other than those described in these instructions.
• Don’t operate the appliance if it’s damaged or malfunctions.
• If blending hot liquids in a pan, always remove the pan from the heat and allow it to cool down a
little before blending.
• Never leave the blender resting in the pan because the bottom of the pan could still be very hot and
damage the blender.
• Don’t run the motor for more than 2 minutes or it may overheat. After 2 minutes switch off for at
least 2 minutes to let the motor cool.
HOUSEHOLD USE ONLY
PARTS
1. Speed control
2. Switch
3. Handle
4. Wand
FITTING/REMOVING ATTACHMENTS
1. Unplug the appliance.
2. Push the end of the handle into the attachment, and turn the handle to the right.
3. To remove the attachment, turn the handle to the left, and lift it off the attachment.
USING
1. Put the plug into the power socket.
2. Press the top button for low speed, release it to switch off.
3. Press the bottom button for high speed, release it to switch off.
• Generally, large quantities, thick mixes, and a high ratio of solids to liquids require longer timings and
slower speeds.
• Smaller quantities, thinner mixes, and more liquids than solids require shorter timings and higher
speeds.
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
AE