Russell Hobbs 18624-56, Инструкция по эксплуатации

Страница: 3 / 48

3
1
SWITCHING ON
6 Plug the stand into the wall socket.
7 Put the kettle on the stand.
8 Move the switch to
1
. The light will glow.
0
SWITCHING OFF
9 When the water boils the kettle will switch off.
10 To switch off, move the switch to
0
, or lift the kettle off the stand.
C GENERAL
11 When you lift the kettle, you may see moisture on the stand. Don’t worry – it’s the steam
used to switch off automatically, which then condenses and escapes via vents under the
kettle.
12 You may see some discolouration on the floor of the kettle. Again, don’t worry – it’s due to
the bonding of the element to the kettle floor.
F USING WITH INSUFFICIENT WATER
13 This will shorten the life of the element. A boil-dry cut-out will switch the kettle off.
14 You must then remove the kettle from its stand to reset the cut-out.
15 Sit the kettle on the work surface till it’s cold.
C CARE AND MAINTENANCE
16 Unplug the stand, and let the kettle cool before cleaning.
17 Wipe all surfaces with a clean damp cloth.
18 Open the lid.
19 Slide the filter up and out of the guides.
20 Rinse the filter under a running tap while brushing with a soft brush.
21 Slide the filter down, into the guides.
22 Close the lid.
Descale regularly, (at least monthly).
23 Descale the appliance at least monthly with a proprietary descaler. Follow the instructions on
the package of descaler.
,
Products returned under guarantee with faults due to scale will be subject to a repair charge.
W
ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn’t be disposed of with unsorted
municipal waste, but recovered, reused, or recycled.
diagrams
1 filter
2 guides
3 lid
4 lid lock
5 handle 6 switch
7 stand
8 light
ins
tru
cti
ons