background image

 

RUSH MH 6 Wash

 User Manual 

23

 

Maintenance 

 

Warning! Read ‘Safety information’ on page 4 before 
servicing the fixture. 

Refer any service operation not described in this user manual to 
a qualified service technician. 
Disconnect the fixture from mains power before cleaning or 
servicing. 
Service fixtures in an area where there is no risk of injury from 
failing parts, tools or other materials. 

The user may carry out the service operations described in this manual. All 
other service operations must be carried out by an authorized Martin™ service 
technician. Do not try to repair the fixture yourself, as you may create a safety 
risk or cause damage that is not covered by the product warranty. 
Installation, on-site service and maintenance can be provided worldwide by 
the Martin Professional™ Global Service organization and its approved 
agents, giving owners access to Martin’s expertise and product knowledge in a 
partnership that will ensure the highest level of performance throughout the 
product’s lifetime. Please contact Martin™ for details. 

Cleaning 

Excessive dust, smoke fluid, and particle buildup degrades performance, 
causes overheating and will damage the fixture. Damage caused by 
inadequate cleaning or maintenance is not covered by the product warranty. 
The cleaning of external optical lenses must be carried out periodically to 
optimize light output. Cleaning schedules for lighting fixtures vary greatly 
depending on the operating environment. It is therefore impossible to specify 
precise cleaning intervals for the fixture. Environmental factors that may result 
in a need for frequent cleaning include:  

  Use of smoke or fog machines.  

  High airflow rates (near air conditioning vents, for example).  

  Presence of cigarette smoke.  

  Airborne dust (from stage effects, building structures and fittings or the 

natural environment at outdoor events, for example).  

If one or more of these factors is present, inspect fixtures within their first 100 
hours of operation to see whether cleaning is necessary. Check again at 
frequent intervals. This procedure will allow you to assess cleaning 
requirements in your particular situation. If in doubt, consult your RUSH by 
Martin dealer about a suitable maintenance schedule.  

Содержание MH 6 Wash





































Отзывы: