Rush MH 2 Wash, Руководство пользователя

Страница: 20 / 40

20
RUSH MH 2 Wash user manual
To adjust the tilt inversion settings:
1. Select TILT INVERSE and press ENTER to confirm. The currently set
mode will blink in the display.
2. Use the DOWN and UP buttons to select the YES (tilt inversion) or NO
(normal) mode.
3. Press ENTER to save your selection (or press MENU to exit without
saving any changes).
Backlight
To turn the control panel display backlight on or off:
1. Select BACK LIGHT menu and press ENTER to confirm. The present
mode will blink in the display.
2. Use the DOWN and UP buttons to select ON or OFF.
3. Press ENTER to save your selection (or press MENU to exit without
saving any changes).
White balance adjustment
To adjust the fixture’s white balance:
1. Select WHITE BALANCE and press ENTER to confirm.
2. Use the DOWN and UP buttons to select RED, GREEN or BLUE.
3. Once the color has been selected, press ENTER.
4. Use the DOWN and UP buttons to adjust the amount of that color
(125~255) in the white balance mix.
5. Press ENTER to save your selection (or press MENU to exit without
saving any changes).
Function delay
To reduce the risk of accidental activation, you can set a delay of up to 3
seconds before a DMX command will activate a function on the control
settings DMX channel. To set the delay duration:
1. Select FUNCTION DELAY and press ENTER to confirm. The current
delay setting will blink in the display.
2. Use the DOWN and UP buttons to select No Delay, 1S Delay, 2S Delay or
3S Delay.
3. Press ENTER to save your selection (or press MENU to exit without
saving any changes).