Rush MH 2 Wash, Руководство пользователя

Страница: 19 / 40

RUSH MH 2 Wash user manual
19
Dimming curves
Four dimming modes are available:
MODE 1
LINEAR. The increase in light intensity appears to be linear as
DMX value is increased.
MODE 2 SQUARE LAW – light intensity control is finer at low levels and
coarser at high levels.
MODE 3 INVERSE SQUARE LAW – light intensity control is coarser at low
levels and finer at high levels.
MODE 4 S-CURVE – light intensity control is finer at low levels and high
levels and coarser at medium levels.
To set the fixture’s dimmer curve:
1. Select DIMMER CURVE and press ENTER to confirm. The mode that is
currently active will blink in the display.
2. Use the DOWN and UP buttons to select Mode1, Mode 2, Mode 3 or
Mode 4.
3. Press ENTER to save your selection (or press MENU to exit without
saving any changes).
Pan/tilt inversion
The PAN INVERSE and TILT INVERSE menus can be used to reverse the
direction of pan and tilt. These settings are useful for symmetrical effects with
multiple fixtures, or when coordinating the movement of fixtures that are floor
mounted and rigged upside down.
To adjust the pan inversion settings:
1. Select PAN INVERSE and press ENTER to confirm. The currently set
mode will blink in the display.
2. Use the DOWN and UP buttons to select YES (pan inversion) or NO
(normal) mode.
3. Press ENTER to save your selection (or press MENU to exit without
saving any changes).