EN
13
6.1 PRE-OPERATIVE CHECKS
1.
Check that all screws are tightened and adjust them if necessary.
2.
Oil and fuel completion.
-
Fill the engine oil bath with RURIS 4T-MAX lubrication oil (see
technical data)
-
Place the machine on a flat surface while feeding on oil.
-
To check the oil level use the oil dipstick, the oil must be at its
maximum level.
-
Check for oil spills
3.
Clean the unit of dust and dirt, especially the air filter.
4.
Check the condition of the cutting blade
5.
Check the status of the safety switch. Make sure it works.
6.2 STARTING
●
Open the fuel valve. (2)
●
Switch the engine shock lever (1) to the closed position.
