Ruris Gospodar A2, Руководство пользователя

Страница: 33 / 40

EN
13
•
When you start the mill, make sure that there are no people or animals
within a radius of 2-3 meters.
•
Start the mill and only then start the dosage for grain or grass input in the
hammer compartment.
•
If the funnel is fed with another type of cereal, it is mandatory to install the
flow adjustment lever and the dosage element 2.
•
Do not open the hammer compartment during operation.
•
Do not insert cobs or other stocks.
Operation of the mill with hammers
•
Connect the plug to the power supply when the machine is at rest, until it
is running normally, open slowly the input plate, fed with grain, without
overloading, otherwise it may cause the engine and power supply to lock.
•
If the mill and engine crashes, turn off the power urgently and unplug the
machinery. Unwind the mill cover screw with the hammers, open it and
clean it, then assemble it, and then start again.
•
During crushing, when the engine is switched off from voltage, it is best
to manually remove the powder from the discharge bag to avoid clogging
of the cloth bag over time.
•
In this mill that has no magnetic removal mechanism, one must not
introduce a hard metal body or other foreign bodies with the cereals and
herbs to be crushed. The user must first check the raw material (cereals,
herbs).
•
During the supply of raw materials, it is forbidden to push manually or with
other bodies. The raw materials (cereals) must pour on their own, due to
the angle of inclination of the funnel.
•
In the case of vegetable material (herbs), they must be pushed inside
without inserting the fingers or hand into the feed hole of the mill.
•
When the power supply is connected and blockages appear on the feed
channel, do not push by hand, wooden stick or iron stick, just turn off the
machine and turn off the power to escape the lock. If the phenomenon